jQuery maphilight documentation


1992-2019 Nord Atlantic USA, Inc.

Equipment described herein require US Government authorization for export purposes. Diversion contrary to US law is prohibited.  


2019 Nord Atlantic USA   Specifications are subject to change. Check legal page here












26 Years of Leadership and Business Excellence - Serving with pride our Military and First Responders.


Nord Atlantic USA
































PVS 31 

Gen 3, Advanced Autogated Tactical Night Vision Goggles

AN/PVS-31 BNVD AG Gen 3   

 GS-07F0235U    To talk to a representative, please call 1 305-989-8875
Special Price and Terms Available for Armed Forces and Federal, State or Local Government Agencies.

ncludes: Binocular Assembly - Binocular system. Batteries – Two AA batteries. Eye Cup Assembly – Prevents the emission of stray light or facial reflections. Soft Carrying Case – Provides easy mobility of the device. Lens Paper – Used to lightly clean the objective and eyepiece glass surfaces. Sacrificial Window – Shields the optics from sand, air particles or anything that may scratch the lens. Demist Shield – Snaps onto the eyepiece to prevent condensation from forming on the optics. Operator's Manual - Product operations manual.

The AN/PVS-31 Binocular Night Vision Device (BNVD) is compact, lightweight, dual tube Gen3 goggle to replace the legacy AN/PVS-15 in the USSOCOM inventory.  In a sea of dual tube night vision goggles, the AN/PVS-31 is the smallest and lightest unit by far.  Weighing in at just under one pound, this system is almost as light as a monocular, yet packs in the same feature set (and then some) of much heavier devices.  Working directly with U.S. Special Operations Forces’ input, the AN/PVS-31 was designed to increase system resolution, significantly reduce head borne weight, improve system of default of gravity, provide additional operational utility, and improve overall operator situational awareness.

The AN/PVS-31 BNVD utilizes L-3′s latest MX-10160 Gen3 image intensifier tubes, providing unmatched clarity in resolution.  These tubes are variable gain-capable, allowing operators to adjust the brightness of their image as situations on the ground dictate.  Gain adjustment is quick and easy; done by simply rotating the power button.  This centrally-located control activates and deactivates the goggle when pressed and held in for two seconds, making all controls easy to locate and operate without being able to see them and while wearing gloves.  There is no integral infrared illuminator in the AN/PVS-31 BNVD.  This feature was not desired by most operators due to its limited distance functionality and added weight/size.

The AN/PVS-31 can run off a single on-board AA battery or a remote battery pack mounted behind the helmet for extended use.  The remote pack allows the goggle to weigh in even less and acts as a counterweight to the entire system.  It also features built-in dual infrared strobe lights for ground personnel identification.  The strobes can be easily activated by a small protected switch under the battery housing.  One thing to note is that the cable connecting the goggle to the remote battery pack will slightly interfere with the right tube’s ability to be pivoted up (see below).

The AN/PVS-31 BNVD has independently pivoting tube housings that allow the operator to run the goggle in a binocular or monocular configuration.  Using two tubes at once allows the eyes to create depth perception and increases the ease in maneuvering terrain and obstacles as well as operating devices such as control panels and door knobs.  However, monocular configurations allow for ease in transitioning between various lighting conditions that often occur on the battlefield and cause operators to switch between night vision weapon-mounted white lights.  The AN/PVS-31 can be configured to adapt to various situations, giving the user the best of both worlds.  Another benefit to the pivoting tube housings is the ability to mount the “flatten” the goggle against the front helmet surface when stowed.  Goggles are often worn throughout the duration of a mission, even in daylight hours, because operators may find themselves in a dark environment.  NVG’s are often default in the stowed position until needed so they can be instantly accessed.  But, this causes a snag hazard since the goggles can easily bang into objects while flipped up.  The ability to pivot the tube housings against the helmet surface creates an overall lower profile, increasing operator safety and equipment life.

 AN/PVS-15  Specifications
L-3 Warrior Systems
4.2″(L) x 4.2″(W) x 3.4″(H)
0.99 lbs (w/ Battery)
Matte Black, Corrosion Resistant
One (1) AA Battery (On-Board), or Four (4) AA Batteries (Remote)
Battery Life:
>15 Hours (Single Battery), or >50 Hours (Four Batteries)
66′ for 2 Hours
1 Year Warranty
Gen3 U.S. L-3
18mm MX-10160 Variable Gain (will also accept MX-11769 as replacement)
64-72 lp/mm Typical
Adjustable/ Variable
Objective Focus:
18″ to Infinity
-0.5 ± 0.1 (Factory Setting) Adjustable from +2.0 to -2.5